|
|
|
|
|
|
Extron VGA & RS232 over TP
|
Our Price: $1,100.00
|
|
|
This transmitter sends high resolution computer-video and RS-232 signals long distances to a c...
|
|
|
|
|
|
|
|
|
|
|
|
|
Extron VGA & RS232 w/SQ RX
|
|
Our Price: $850.00
|
|
|
Mini Twisted Pair Receiver for RGBHV and RS-232 with Loop Through and Skew Delay Equalizer
|
|
|
|
|
|
|
|
|
|
|
|
|
FSR CDA-2
|
List Price: $91.00
Our Price: $68.00
You Save $23.00!
|
|
|
The CDA-2 is a computer video distribution amplifier. It takes the input signal from the video card of a computer and splits it to be used by a projector and a monitor. This unit not only splits the signal it also buffers it to ensure absolute signal integrity at the receiving device (projector or monitor). With 300 MHz of bandwidth, the CDA-2 can drive any VGA, Super VGA, XGA or XGA-2 computer video signal up to 50 feet using high resolution cable (for longer runs up to 175 feet use the CDA-2EQA).
|
|
|
|
|
|
|
|
|
|
|
|
|
FSR CDA-4
|
List Price: $409.00
Our Price: $305.75
You Save $103.25!
|
|
|
The all new CDA-4 and -6 are ultra high resolution, ultra high bandwidth 1 x 4 and 1 x 6 computer distribution
amplifiers suitable for applications requiring the highest possible video quality. The output channels on each unit have cable equalization permiting long cable runs
while maintaining excellent signal integrity or even the highest video resolutions.
This means that the signal you feed into the CDA-4 or CDA-6 will arrive at the far
end of the cable with an almost immeasurable amount of loss and no distortion due to peaking effects. Not only do these two units have over 375 MHz of bandwidth but they also have the
FSR computer compatible sychronizing circuitry to ensure a rock stable video image
at any resolution and signal level. Also channel-channel matching (red vs green/red vs
blue) response is extremely flat. The CDA-4/6 ships with a power supply, and a full width rack mount kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
FSR CVD-2EQ
|
|
|
The CVD-2EQA is a 1 in 2 out Composite Video and Stereo Audio DA with cable equalization on each output and 100 MHz of video bandwidth. The AC adapter is included. The CVD-2EQ is also available as a version without audio.
These new additions to the FSR line of distribution amplifiers have individual adjustments on each of the outputs allowing adjustment of each output to compensate for the cable�s length. This equalization provides superior signal integrity on each line, especially in applications where the output cable runs are of varying length.
|
|
|
|
|
|
|
|
|
|
|
|
|
FSR E-200
|
List Price: $13,327.00
Our Price: $11,494.54
You Save $1,832.46!
|
|
|
The Eagle 200 represents a quantum leap in seamless switching capabilities to answer the needs of today’s user. With 2 brand new high performance scalers, 8 analog video inputs, 2 Standard Definition SDI inputs (HD SDI on Eagle 200 HD) and 2 DVI inputs, the Eagle 200 promises extreme performance at an affordable price. Traditionally, seamless switchers with 2 scalers had 1 locked to preview and 1 locked to the program output. Transitions were simply swapping the scalers between preview and program. This placed significant restrictions on special effects such as Picture in Picture (PiP) and Keying. The Eagle 200 removes those restrictions by treating the scalers simply as layers.
|
|
|
|
|
|
|
|
|
|
|
|
|
FSR E-200-HD
|
List Price: $15,993.00
Our Price: $13,794.00
You Save $2,199.00!
|
|
|
The Eagle 200 represents a quantum leap in seamless switching capabilities to answer the needs of today’s user. With 2 brand new high performance scalers, 8 analog video inputs, 2 Standard Definition SDI inputs (HD SDI on Eagle 200 HD) and 2 DVI inputs, the Eagle 200 promises extreme performance at an affordable price. Traditionally, seamless switchers with 2 scalers had 1 locked to preview and 1 locked to the program output. Transitions were simply swapping the scalers between preview and program. This placed significant restrictions on special effects such as Picture in Picture (PiP) and Keying. The Eagle 200 removes those restrictions by treating the scalers simply as layers.
|
|
|
|
|
|
|
|
|
|
|
|
|
FSR E-200-HD-EOC
|
List Price: $19,250.00
Our Price: $16,603.05
You Save $2,646.95!
|
|
|
Eagle 200 HD w/ Enhanced Output Card
|
|
|
|
|
|
|
|
|
|
|
|
|
FSR EC-200
|
List Price: $5,995.00
Our Price: $5,171.00
You Save $824.00!
|
|
|
The Eagle 200 represents a quantum leap in seamless switching capabilities to answer the needs of today’s user. With 2 brand new high performance scalers, 8 analog video inputs, 2 Standard Definition SDI inputs (HD SDI on Eagle 200 HD) and 2 DVI inputs, the Eagle 200 promises extreme performance at an affordable price. Traditionally, seamless switchers with 2 scalers had 1 locked to preview and 1 locked to the program output. Transitions were simply swapping the scalers between preview and program. This placed significant restrictions on special effects such as Picture in Picture (PiP) and Keying. The Eagle 200 removes those restrictions by treating the scalers simply as layers.
|
|
|
|
|
|
|
|
|
|
|
|
|
FSR Eagle-3
|
List Price: $53,495.00
Our Price: $46,139.45
You Save $7,355.55!
|
|
|
The Eagle 300 is a multi-layer seamless switcher intended for live event applications. FSR has accumulated 8 years of experience with seamless switchers and the Eagle 300 is the result of that experience and our commitment to answer our customer’s needs.
The Eagle 300 is based on a modular concept allowing the system to be matched to the customer’s application while maintaining an affordable upgrade path. The three primary components are the System Controller, Video Processor and a Matrix Switch. Each Video Processor can be populated with up to 3 Mix / Effects cards allowing up to 6 layers of Picture-in-Picture and Key effects with a native resolution background and a down stream key on screen at any one time.
Up to 6 Video Processors can be used with a single controller for multi-screen applications as well as ultra-wide screen edge blended displays.
|
|
|
|
|
|
|
